10/100M WDM Converter RJ-45 Fiber Optic mini Medioa Converter sfp
♦ Supports pure converter mode data forwarding for extreme low
♦ Built in 128Kb RAM for data buffer
♦ Supports modified cut-through frame forwarding for low latency
♦ Optional forward fragments
♦ 10/100Mbps and full/half duplex automatically configure in TP port
♦ Supports end fault function (optional) Introduction
♦ MDI/MDI-X Auto Negotiation
♦ Support EEPROM configuration
♦ LED Indicators: POWER, FX LINK/ACT, 100, TP LINK/ACT, FDX/COL.
♦ FCC Class A & CE approved
♦ LLR, LFP - Link Loss Return (LLR), Link Failure Pass (LFP)
features supported RoHs compliant
♦ Only 1 fiber used instead of 2 - WDM BiDi technology
♦ Stainless steel parts (value added feature)
♦ Office to Office
♦ Building to Building
Wavelength: TX1310nm/RX1550nm; TX1550nm/RX1310nm, for high distance
TX1490nm/RX1550nm; TX1550nm/RX1490nm, 1310nm, 1550nm.
Data Buffer: 128Kb
Power temperature variation: 0.2mw/℃
Input Power Range (dBm): 0~-40
Power: 2.5 W
High perfomance ICPLUS IP113C chipset based
Fiber cable(m): 8.3/125, 8.7/125, 9/125 or 10/125
Maximum distance: 120 km (available ordering options
Input power: IA@+5VDC or 110~260VAC or 48VDC
Dimensions: 60 (W) x 20 (H) x 90(L)
Relative humidity;5% to 90%
Operating temperature: 0 to 70 degrees
Storage temperature : -20 to 70
1, Different Size.
In the market 90% media converter Dimensions: 95×70×26mm. But this
type media converter Dimensions: 90
×60×20mm. Save power consume and delivery charge.
2, DIP application.
On the media converter bottom, we have 4 bit DIP Switch. A DIP
switch is placed at the bottom of the case.
Depend on different configurations, the user can set the different
operating mode (UTP port speed 10M or100M, full or half duplex
mode, pass through mode, LFP enable or disable).
3, 1U Media Converter Chassis( Max support 12slots)
In the market, 99% media converter chassis is 2U height, the max
support 12pcs media converter card,
10/100M and 10/100/1000M are available