Fiber Optic 1U Rack Media Converter chassis for 12 units mini media
Mi Series 10/100M Media Converter
Complies with IEEE802.3 and IEEE802.3u10/100Base-TX and 100Base-FX
MTU size supported 1600 bytes maximum
Supports pure converter mode data forwarding for extreme low
Built in 128Kb RAM for data buffer
Supports modified cut-through frame forwarding for low latency
Optional forward fragments
10/100Mbps and full/half duplex automatically configure in TP port
Supports end fault function (optional)
MDI/MDI-X Auto Negotiation
Support EEPROM configuration
LED Indicators: POWER, FX LINK/ACT, 100, TP LINK/ACT, FDX/COL.
FCC Class A & CE approved
LLR, LFP - Link Loss Return (LLR), Link Failure Pass (LFP) features
Only 1 fiber used instead of 2 - WDM BiDi technology
Stainless steel parts (value added feature)
Standalone, Wallmount or Hotpluggable in 19' chassis - universal
The MI series 10/100M converter complies with IEEE 802.3 standards.
It is designed to convert data signal between 10/100 Base-TX and
100 Base Fx Fast Ethernet. The media converter is connected between
Fiber cable and twisted cable segments with network operating
This converter can be used as a standard alone unit or a slide-in
module to fit the 1U 19” converter rack. 1U 19inch chassis max.
support 12pcs Cards.
Dual Fiber or WDM are available.
BiDi WDM - Wave Division Multiplexing Technology allows you use
just a 1 fiber cable instead of 2, because transmit and receive
channels are separated by different wavelengths.
Converters universal - they can work as standalone modules in point
to point applications with external power supply modules - or same
converter can be used as a plug in module in 3C-MC-R12 Chassis.
Such universal design, made by3c-Link saves a lot of cost and time
for network planning - you no need thing, how much units you need
as standalone and how much units you need as plug in modules in
chassis - just order same module and decide later.
Also, it does not matters for what type of TX/RX you are using at
central side or remote side, they will always operate smoothly
Wavelength: TX1310nm/RX1550nm; TX1550nm/RX1310nm, for high distance
Data Buffer: 128Kb
Power temperature variation: 0．2mw/℃
Input Power Range (dBm): 0~-40
Power: 2.5 W
High perfomance ICPLUS IP113C chipset based
Fiber cable(m): 8.3/125, 8.7/125, 9/125 or 10/125
Maximum distance: 120 km (available ordering options 20/40/60/80/100/120 km)
Input power: IA@+5VDC or 110~260VAC or 48VDC
Dimensions: 60 (W) x 20 (H) x 90(L)
Relative humidity;5% to 90%
Operating temperature: 0 to 70 degrees
Storage temperature : -20 to 70
- Optical networks
- FTTH networks
- Government house
- The new building
- Soho end users
Support LFP function:
Fig. 1 Normal status Via pair of LFP’S
Fig. 2 The status when copper link is broken
Fig. 3 The status when fiber cable C or B is broken
What is new ?
1, Different Size.
In the market 90% of media converter Dimensions: 95×70×26mm. But this type media converter Dimensions: 90×60×20mm. Save power consume and delivery charge.
.2, DIP application.
4 bit DIP Switch. A DIP switch is placed at the bottom of the case. Depend on
different configurations, the user can set the different operating
mode (UTP port speed 10M or100M, full or half duplex mode, pass
through mode, LFP enable or disable).
3, 1U Media Converter Chassis( Max support 12slots)
In the market, 99% of media converter chassis is with 2U height,
max. support 12pcs media converter card,
10/100M and 10/100/1000M are available.
|WDM||400= 4 Ports 10/100M||85=850nm||20=20Km||R14|